Ceddy's Lair

CeddyMods Donation

Ecu Pin comes with a 3 foot length of wire soldered on and heat shrinked.

For adding pin to ecu plug.

Example uses:
Pin for Base Timing,
Pin for NLTS,
etc.

*Price includes shipping in U.S.

( Please note that I am not selling the hardware on this page for profit,  just making it available to those who can’t or don’t want to make it themselves.   I ship as soon as possible, but depending on my real job, I sometimes ship only once a week. )

Temporarily Sold Out

Ecu Pin with 2.5 mm Audio Plug attached.
3 foot in length.

Used for cars that don’t have a wire hooked up to pin 79, for flashing.
(Needed for 95-97 DSMs)

The 2.5mm Plug, plugs directly into the OpenPort 2.0, negating the need for the Mitsu Flash Connector.

*Price includes shipping in U.S.

( Please note that I am not selling the hardware on this page for profit,  just making it available to those who can’t or don’t want to make it themselves.   I ship as soon as possible, but depending on my real job, I sometimes ship only once a week. )

Temporarily Sold Out

Big Maps patch for CeddyMods.

Replaces the stock Timing and Fuel maps with maps twice in size.
The stock maps only have resolution up to 180 Load or 12 psi.
Big Maps increases this to 340 Load or 35 psi.

Includes latest CeddyMods Rom with Big Maps, and updates for 1 year.

For people who don’t feel comfortable modifying their flash image themselves.

Includes:
Injector Scaling and Latency Setup for larger injectors.
Maf Scaling if an EVO/3G Maf is used.
Rev Limit and Idle Speed.
Rescaling of Fuel and Timing Map Axises for higher RPMs and Loads.

Fuel and Timing Map modification:
Either a different peak timing and AFR can be selected or 1G DSM or EVO maps can be copied.

This will give you a good starting point to start your tuning process.

* This is only for flash images that have a EcuFlash definition.

* You must have a Wideband for me to do a Base Map, I cannot accurately scale injectors without one.